Stable safety guard with aluminium design from RK Rose+Krieger
Flexible safety guard system for maximum customisation
Using special Click&Safe connection elements, the safety guard elements can be fastened quickly and safely to pillars made of BLOCAN® aluminium profiles – also from the RK Rose+Krieger modular system. Depending on their application, the posts themselves can be fixed firmly to the floor using special feet or connected directly to the machines. The connection elements not only facilitate assembly, they also offset small angle deviations and height differences between the posts and the guard elements. They are one of very few systems of their kind to fully comply with Machinery Directive 2006/42/EC. This is because, even though no special tools are required for installing the guard, it can only be dismantled using a special RK unlocking tool.
Visually attractive safety guard system
made of aluminium profiles – individually
adaptable to all types of machine
The RK protection system has no set dimensions. The sizing of individual elements and of the overall system is determined primarily by the customer, who is in possession of all the data concerning distances to sources of danger. Safety distances for upper and lower limbs are defined by the standard DIN EN ISO 13857. Once the material to be used in the fence elements and the distance from the source of danger are known, it is possible to design the optimum housing, whereby RK Rose+Krieger enables dimensioning of the safety guard elements and posts in millimetre increments. This makes the system extraordinarily flexible and adaptable.
Safety guard elements can be tailored to
requirements: Pillars | Frames with panels |
l Stable safety guard system made of aluminium profiles
l Minimal effort required in construction due to standard grid
l Short assembly times with no mechanical work
l Clamping profiles allow a wide variety of panel elements to be installed
l Smooth, easy-clean outer surfaces, attractive design
l Comprehensive range of accessories that complies with the new EU Machinery Directive 2006/42/EC